Entuity server sizing depends on different aspects of the monitored network environment. For example, device interface density, SNMP agent response times, network latency and other external factors will all affect the maximum number of devices a server can support. It is recommended that you seek advice from an Entuity technical representative when specifying your server configuration.
ENA is only certified for use with the 64-bit English edition variants of:
- Red Hat Enterprise Linux ES version 6.
- Red Hat Enterprise Linux ES version 7.
- Oracle Linux 6.
- Oracle Linux 7.
- Windows Server 2012.
- Windows Server 2012 R2.
- Windows Server 2016.
You can install ENA to both physical and virtual machines. The hardware requirements are the same for both.
The two key loading factors are the number of devices and the number of ports (i.e. physical and virtual interfaces). These are inversely related - the maximum number of devices that can be managed without affecting performance characteristics is inversely proportional to the total number of objects.
Estimate how many devices and ports you want the server to manage. You should only include to your estimate devices that you intent to SNMP poll (this is because Ping Only devices have a limited impact on server resources). ENA uses ICMP to only poll their management IP addresses.
Minimum server specifications:
- Low: 400 devices and 25,000 ports.
- Intermediate: 800 devices and 50,000 ports.
- High: 1,000 devices and 70,000 ports.
|Minimum CPU Clock Speed||2.5GHz||2.5GHz||2.5GHz|
|Intel Processor Family (or equivalent)||Xeon E3 Family||Xeon 5000 Sequence||Xeon E5 Family|
|Minimum Number of Cores||6||8||16|
|Windows Minimum Physical Memory||6GB||12GB||24GB|
|Linux Minimum Physical Memory||8GB||16GB||32GB|
Server configuration components:
The relationship between Entuity server performance and the different components of the machine on which it is installed is critical when developing a machine specification. The key components are:
- CPU clock speed:
- the time to process certain functions, e.g. to display a web page or generate reports, is governed by the speed of single-threaded operations. The faster the clock speed, the faster the single-threaded operations are processed. Therefore, server clock speed will most noticeably affect the responsiveness of the user interface. Entuity Support recommend that servers have a minimum clock speed of 2.5GHz, and ideally have speeds nearer 3GHz.
- Number of CPU cores:
- this governs how many multi-threaded operations can take place simultaneously. ENA's polling engine has a multi-threaded architecture, and therefore its polling capacity and data throughput increases with the number of available CPU cores. The relationship between polling capacity and cores is not linear - more cores have greater contention for shared system and application resources. Entuity Support has determined that there are only small improvements in performance by increasing beyond 12 cores.
- it is important that the memory requirements of ENA's running processes can be accommodated in physical memory. System performance is severely impacted when physical memory is exhausted and process memory allocations are paged to the disk. In addition, there are benefits to be gained by having extra spare memory, since this will be used by the operating system to cache disk information which can then improve database performance.
- Disk capacity:
- minimum disk space requirements cover ENA's installed software, its embedded database, and storage for standard usage of scheduled reports. Entuity Support recommends a SCSI Ultra 320 or SAS disk sub system for physical servers, preferably with separation of disk I/O generated by memory swapping from database traffic. Therefore, the operating system and swap partition should be located on one physical disk with ENA including its database on another.
- RAID 5 is not recommended, because physical disk synchronization issues seem to cause high latency. RAID 1 (mirroring) is acceptable, but must be a hardware implementation.
- Disk performance:
- ENA's database relies on fast throughput of data to the storage system. Entuity Support recommends that systems are configured with the fastest storage system options available.
- Entuity Support also recommends that SSD storage be used. If hard disks are employed, then the disk rotational speeds should be no slower than 15Krpm, and Input/Output Operations Per Second (IOPS) is rated at 150 or above.
Amending server configuration components:
When installing ENA, it is essential to ensure that the server is sized correctly, and that the software is configured correctly to suit the server specifications. You will need to make configuration changes in order to match the software to the server specifications.
You can amend the default configuration of an Entuity server through entuity_home\etc\entuity.cfg. After amending entuity.cfg, you must first run configure.
Changing a setting without the appropriate hardware components can seriously impact server performance.
When the requirements of a server resource are:
- low, you should not have to amend the default configuration settings.
- intermediate, you could amend:
- high, you could amend:
- for Linux installs:
- for Windows installs:
- for all operating systems:
- for Linux installs:
- Central License Server and not managing devices:
- this has a low category server specification. A Central License Server allows you to control licensing of all Entuity servers from one central server. This makes it very easy to move device licenses between servers when required.
- Consolidation Server and not managing devices:
- this has a low category server specification. In a multi-server environment, users can log on to an Entuity Consolidation Server to access information gathered and stored by multiple polling servers.
- Polling Server:
- this faces the most significant loading factors through the number of devices and ports. Use the above chart to identify the most suitable server configuration, based on managed device and port numbers. If the server's role is to additionally act as a Central License Server, a Consolidation Server or a Flow Collection Server (as well as a Polling Server), it is recommended that a faster processor clock speed (closer to 3GHz) is selected.
- Flow Collection Server:
- this is accommodated within the recommended server configurations. If the server's only role is to act as a Flow Collector (without polling), you can identify the server configuration from the chart by using a port count of zero.
Required server locale
When installing ENA on a server, the server locale must be either American English or British English.
Estimated bandwidth requirement
Please see this article detailing how much bandwidth ENA needs to support monitoring of network devices.