Supported Cisco APIC objects and attributes
Fabric Node
Fabric Node that becomes an APIC
Tenant
Application Profile
End Point Group
Line Card
Fan Tray
PSU
Supervisor Card
Bridge Domain
Supported events and incidents
Supported Cisco APIC objects and attributes:
ENA collects metrics on the following Cisco APIC objects and their attributes.
- 100% health = healthy.
- 0% health = unhealthy.
Cisco advises that if health drops below 90%, then there is a problem. Therefore, ENA sets 90% as the default health threshold. When a metric's health drops below 90%, ENA generates an event on that metric.
For the APIC CPU and APIC Memory metrics, ENA also uses a percentage, but the are not based on health. Instead, they are based on usage:
- 100% usage = unhealthy.
Please refer to this article for further information on APIC health.
Pod
Object Attributes:
- Pod Name
Stream Attributes:
- Pod Health
Fabric Node
Object Attributes:
- Distinguished Name
- Role
- LC Own
- Version
- Vendor
- Model
- ID
- Serial
- Address
- In Band Management Address
- Out Band Management Address
Stream Attributes:
- Fabric Node Health
- Fabric Node Status
Fabric Node that becomes an APIC
Object Attributes:
- Distinguished Name
- Role
- LC Own
- Version
- Vendor
- Model
- ID
- Serial
- Address
- In Band Management Address
- Out Band Management Address
Stream Attributes:
- Fabric Node Health
- Fabric Node Status
- APIC CPU %
- APIC Memory %
Tenant
Object Attributes:
- Name
- Distinguished Name
Stream Attributes:
- Tenant Health
Application Profile
Object Attributes:
- Name
- Distinguished Name
Stream Attributes:
- N/A
End Point Group
Object Attributes:
- Name
- Distinguished Name
- Match Type
- TX ID
- PC Enf Pref
- Trigger State
- Priority
Stream Attributes:
- EPG Health
Line Card
Object Attributes:
- Name
- Distinguished Name
- Serial
- Revision
- Type
- Vendor
- Number of Ports
- Model
Stream Attributes:
- Line Card Health
- Line Card Status
Fan Tray
Object Attributes:
- Name
- Distinguished Name
- Serial
- Revision
- Vendor
- Model
Stream Attributes:
- Fan Tray Health
- Fan Tray Status
PSU
Object Attributes:
- Name
- Distinguished Name
- Serial
- Revision
- Vendor
- Model
- Voltage
Stream Attributes:
- PSU Health
- PSU Status
Supervisor Card
Object Attributes:
- Name
- Distinguished Name
- Serial
- Revision
- Type
- Vendor
- Number of Ports
- Model
Stream Attributes:
- Supervisor Card Health
- Supervisor Card Status
Bridge Domain
Object Attributes:
- Name
- Distinguished Name
- Unknown MAC Unicast Action
- Type
- MAC
- Multicast Allow
- Broadcast IP
- Segment
- Scope
- Unknown Multicast Action
- ARP Flood
- IP Learning
- Multicast Destination Packet Action
- Limit IP Learning to Subnets
- MTU
- Unicast Route
Stream Attributes:
- N/A
Supported events and incidents:
- SDN Controller Poll Failure.
- SDN Controller Poll Failure Cleared.
- ACI APIC High Memory (relative to threshold).
- ACI APIC High Memory Cleared.
- ACI APIC High CPU (relative to threshold)
- ACI APIC High CPU Cleared.
- ACI Fault
- ACI Fault Cleared
- ACI Low EPG Health (relative to threshold).
- ACI Low EPG Health Cleared.
- ACI Low Tenant Health (relative to threshold).
- ACI Low Tenant Health Cleared.
- ACI Low Supervisor Card Health (relative to threshold).
- ACI Low Supervisor Card Health Cleared.
- ACI Low PSU Health (relative to threshold).
- ACI Low PSU Health Cleared.
- ACI Low Fan Tray Health (relative to threshold).
- ACI Low Fan Tray Health Cleared.
- ACI Low Line Card Health (relative to threshold).
- ACI Low Line Card Health Cleared.
- ACI Low Fabric Node Health (relative to threshold).
- ACI Low Fabric Node Health Cleared.
- ACI Low Pod Health (relative to threshold).
- ACI Low Pod Health Cleared.
Comments
0 comments
Please sign in to leave a comment.