Support for Dell EMC VNX, VNXe (+Unity) devices

Supported devices

To collect data from Dell EMC VNX and VNXe storage devices

Data collected

To add a Dell EMC VNX or VNXe storage device to my network

Supported devices:

Entuity supports the following Dell EMC VNX and VNXe devices:

VNX1 series:

• VNX5100
• VNX5300
• VNX5500
• VNX5700
• VNX7500
• VNX VG2
• VNX VG8

VNX2 series:

• VNX5200
• VNX5400
• VNX5600
• VNX5800
• VNX7600
• VNX8000

VNXe1 series:

Note, support for VNXe3100, VNXe 3150 and VNXe3300 has been removed from Entuity v19.0 P04 upwards.

VNXe2 series:

• VNXe1600
• VNXe3200

To collect data from Dell EMC VNX and VNXe storage devices:

In order to collect data, Entuity uses a direct connection to EMC storage devices using NAVISecCLI and uemcli.

You can specify which connector to use (NAVISecCLI or uemcli) when adding the storage device to your network. Please see this article for further help and information on adding storage devices to your network, and for information on the uemcli versions that work with supported Dell VNXe storage devices.

Data collected:

VNX:

VNXe:

To add a Dell EMC VNX or VNXe storage device to my network:

Please see this article for further help and information on adding a storage device to your network.