To create a monitoring user account
Configuration details to specify when adding the asset to Entuity
Entuity supports hardware monitoring on Oracle/Sun Blade Chassis through SSH commands. Entuity discovers the enclosure, processor, fans, IO Modules, power supplies, and various environmental sensors of each chassis. To do so, the Entuity collector uses port 22 (which must be open bidirectionally between the Entuity server/agent and the Oracle/Sun Blade chassis) and a monitoring user account.
Supported devices
- Oracle/Sun Blade Chassis 6000
To create a monitoring user account:
Note, the italicized text in the code examples of this procedure represent variables. Replace the variables in the examples with values that are applicable to your environment.
- Log into the local server blade ILOM CLI using an Admin account.
-
At the SP level, create a new user account on the blade server in the chassis.
Create /SP/users/<username>
-
Enter a password for the new user account, confirm the password, and then assign the roles that you want to the account.
For the account role, the<role-name>value can beadministratororoperator, or you can enter one of the role letters instead, as listed in the following example:Set /SP/users/<username> password=<password>
role=<role-name|a|u|c|r|o|s> -
Verify that the user is successfully created.
Show /SP/users/<username>
Configuration details to specify when adding the asset to Entuity
When you add the chassis to Entuity from the Asset Management page, specify the following information on the Add Asset form:
- In the Management Level section, select Server from the Asset Category drop-down field, and Oracle/Sun Servers from the Asset Type drop-down field.
- In the Asset Details section, enter the Sun/Oracle blade server IP address in the Polled Name/IP Address field.
- In the Hardware Monitoring section, select Oracle/Sun Blade Servers (SSH) from the Connection Method drop-down field.
- On the Credential form (accessed by clicking the Credential field in the Hardware Monitoring section), enter the newly created user account name and password in the appropriate fields.
Comments
0 comments
Please sign in to leave a comment.