Articles in this section

Introduction to server monitoring, and supported server hardware platforms

Avatar
Stuart Hill
  • Updated
Follow

Applicable to Entuity v19.0 upwards.

 

Introduction

Hardware

OS monitoring

To add a server monitoring device to my network

 

 

Introduction

From Entuity v19.0 upwards, Entuity supports server hardware monitoring and server OS monitoring.

 

 

Hardware monitoring

As of Entuity v21.0 P03, Entuity provides monitoring for the following hardware platforms:

  • Cisco UCS
    • Cisco UCS C-Series (REST)
    • Cisco UCS CIMC Manager (SNMP)
    • Cisco UCS Fabric Interconnect (SNMP)
    • Cisco UCS Manager (XML)
  • Dell CMC
    • Dell CMC (SSH)
  • Dell MX
    • Dell MX Chassis (REST)
  • Dell PowerEdge, VxFlex and VxRail iDRAC
    • Dell iDRAC (REST)
    • Dell iDRAC (SNMP)
    • Dell OpenManage SNMP agents - not a server, but an application that runs on the server to report on the state of the hardware.
  • HP BladeSystem
    • HP BladeSystem (SNMP and SSH)
  • HP Proliant
    • HP iLO (REST and SNMP).
    • HP Insight Manager SNMP agents - not a server, but an application that runs on the server to report on the state of the hardware.
  • HP Superdrome
    • HP Superdrome (WBEM)
  • HP Synergy
    • HP Synergy (REST)
  • IBM Flex System
    • IBM/Lenovo CMM (WBEM)
    • IBM/Lenovo XClarity CMM (REST)
  • IBM Power
    • IBM Power AIX (SSH)
    • IBM Power Linux (SSH)
    • IBM Power HMC (SSH)
  • IBM X-Series
    • IBM Director Agent (WMI)
    • IBM/Lenovo IMM (WBEM)
  • Intel Servers
    • Intel Servers (REST)
  • Lenovo ThinkServer
    • IBM/Lenovo XClarity IMM (REST and SNMP)
  • Moonshot
    • Moonshot (REST)
  • Nutanix Servers
    • Nutanix Servers (REST)
  • Oracle/Sun Servers
    • Oracle/Sun Servers Blade (SSH)
    • Oracle/Sun Servers iLOM SNMP
  • Supermicro
    • Supermicro BMC REST
  • VMWare ESXI
    • VMWare ESXI (WBEM)

 

OS monitoring

Entuity provides OS monitoring via SNMP (for managed hosts) and proprietary virtualization platform APIs (for ESXi, Hyper-V, Oracle VM, AWS and Azure).

From Entuity v19.0 upwards, data collection via WinRM (for Windows servers) and ssh-based CLI (for Linux servers) is also supported.

From Entuity v20.0 P03 upwards, data collection on the following is also supported:

 

 

To add a server device to my network:

Please see this article for help and information on adding a server device to your network.

Related articles

Comments

0 comments

Please sign in to leave a comment.