To create a monitoring user account
Configuration details to specify when adding the asset to Entuity
Entuity supports hardware monitoring on Fujitsu Primergy RX200 servers with an Integrated Remote Management Controller (iRMC) version of S2 through SSH commands. Entuity discovers the enclosure, batteries, cpus, fans, environmental sensors, power supplies, and more for each system. To do so, the Entuity collector uses port 22 (which must be open bidirectionally between the Entuity server/agent and the Fujitsu Primergy server) and a monitoring user account.
Supported devices
-
Fujitsu Primergy RX Series, TX Series, CX Series, and BX Series servers using iRMC S2
To create a monitoring user account:
- Log into the management interface with administrator-level credentials from the web UI.
- Navigate to User Management > iRMC S2 User > New User.
- Enter a username, password, and password confirmation for the user account.
- Ensure the Enable User check box is selected and optionally enter a description for the user account.
- Set the User Shell (Text Access) to SMASH CLP.
- In the LAN and Serial Channel Privilege dropdown fields, select the Operator role.
- Click OK to save your changes.
Configuration details to specify when adding the asset to Entuity
When you add the server to Entuity from the Asset Management page, specify the following information on the Add Asset form:
- In the Management Level section, select Server from the Asset Category drop-down field, and Fujitsu Primergy from the Asset Type drop-down field.
- In the Asset Details section, enter the system IP address in the Polled Name/IP Address field.
- In the Hardware Monitoring section, select Fujitsu Primergy (SSH) from the Connection Method drop-down field.
- On the Credential form (accessed by clicking the Credential field in the Hardware Monitoring section), enter the newly created user account name and password in the appropriate fields.
Comments
0 comments
Please sign in to leave a comment.