Applicable to Entuity v19.0 P03 upwards.
To collect data from Pure Storage devices
To add a Pure Storage device to my network
Supported devices:
Entuity supports all Pure Storage device models that support v1.8 of the API.
To collect data from Pure Storage devices:
In order to collect data, Entuity uses a direct connection to Pure Storage devices using REST API connection. Please see this article for further help and information on adding storage devices to your network.
For non-production deployments (test environments), you can disable strict certificate checking. Note, this is not recommended for production environments. To disable strict certificate checking, navigate to the following file:
In Entuity v19.0:
[entuity install]/lib/CollectionEngine/etc/cecfg.properties
In Entuity v20.0:[entuity install]/etc/CollectionEngine/cecfg.properties
In this file, there is the property:trustAllCertificates=[value]
If set to 'true', certificate checking will be removed. The property might be commented with a preceding # sign (e.g. #trustAllCertificates=true), in which case you will need to remove the # for the property to be recognized.
Data collected:
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
PPT_SR_ |
|
---|---|---|---|---|---|---|---|---|---|
ID | ✓ | ✓ | |||||||
Capacity | ✓ | ✓ | |||||||
IP Address | ✓ | ✓ | |||||||
IPv4 Gateway | ✓ | ✓ | |||||||
IPv4 Subnet | ✓ | ✓ | |||||||
IQN | ✓ | ||||||||
MAC Address | ✓ | ✓ | |||||||
Model | ✓ | ||||||||
MTU | ✓ | ✓ | |||||||
Name | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Reading | ✓ | ✓ | |||||||
Serial | ✓ | ✓ | |||||||
Size | ✓ | ✓ | |||||||
Slot | ✓ | ✓ | |||||||
Speed | ✓ | ✓ | |||||||
State | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
State Detail | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
Type | ✓ | ✓ | |||||||
Version | ✓ | ✓ | |||||||
Voltage | ✓ | ✓ | |||||||
WWPN | ✓ |
To add a Pure Storage device to my network:
Please see this article for further help and information on adding a storage device to your network.
Comments
0 comments
Please sign in to leave a comment.