Applicable to Entuity v19.0 and above. If you are using an earlier version of Entuity, please see this article.
To add a device to a zone via Auto Discovery
To add a device to a zone, when taking a single device under management
To move a device from one zone to another
Upon discovering a device on your network, you can add it a zone of your choice. You can also move a device from one zone to another.
Once you have set up at least one zone, the Entuity interface updates to display zones when placing or modifying devices under management.
To add a device to a zone via Auto Discovery:
- In the Main Menu, click Asset Management.
- Click the Auto Discovery tab.
- Run Auto Discovery. When doing so, you must specify the zone in the Zone field.
To add a device to a zone, when taking a single device under management:
- In the Main Menu, click Asset Management.
- On the Managed Assets tab, click Add Assets.
- Add a single device. When doing so, you must specify the zone in the Zone field.
To move a device from one zone to another:
- In the Main Menu, click Asset Management.
- On the Managed Assets tab, from the table of devices, select the device that you want to move and click Modify Asset.
- Select your preferred device and click Modify at the bottom of the browser.
- This will open the Modify Asset form. In the Zone field, select the zone you would like to move the device to.
- Click OK to save the change, otherwise click Cancel.
Comments
0 comments
Please sign in to leave a comment.