Linux OS SSH monitoring

This article is applicable to Entuity v21.0 upwards. If you are using an earlier version of Entuity, please see this article.

Introduction

Summary dashboard details

Monitored attributes for Linux OS

To configure Linux OS SSH monitoring

Introduction:

The following versions of Linux are supported for SSH monitoring:

RedHat Enterprise Linux (versions 7, 8 and 9)
Ubuntu (v18)
Suse (v11)

From Entuity v21.0 P01 upwards, basic OS support is included for legacy Linux versions.

Out of the box, Linux SSH monitoring is detailed in the following dashboards:

Summary dashboard details:

The Summary dashboard details the following:

name
type
server name
OS architecture, description, distribution, domain name, hostname, manufacturer, name, release, type, version
incident summary
events over time
network adapters
CPU utilization
memory utilization
logical volume

Monitored attributes for Linux OS:

Entuity monitors the following attributes for Linux OS (which can be seen on the Attributes dashboard):

CE OS Polling Duration
CE OS Polling Status
CE OS Polling Status Detail
Committed Bytes in Use %
Count of Critical Events
Count of Info Events
Count of Major Events
Count of Minor Events
Count of Severe Events
CPU Utilization % across all CPUs (Daily)
CPU Utilization % across all CPUs (Hourly)
CPU Utilization %
Display Name
Free Physical Memory
Free Swap Memory
Free Virtual Memory
Incident Status
Incident Summary (Open Incidents)
Incident Summary (Closed Incidents)
Load Averages - data collected is of 5 minute average.
Number of Logical Processors
OS Architecture
OS Description
OS Distribution
OS Distribution Version
OS Domain name
OS Hostname
OS Manufacturer
OS Name
OS Release
OS Type
OS Version
OS Version Code Name
Pages
Pages Output
Process Count
Processor Time % (Daily)
Processor Time % (Hourly)
Processor Time %
Shared Memory Segments Utilization % - polled as an additional metric for the base OS object.
StormWorks ID
Total Physical Memory
Total Swap Memory
Total Virtual Memory
Used Physical Memory %
Associations:

Device
- Active Tunnels
- Active VPNs
- Admin Down %
- Asset Tag
- Average SNMP Response Time
- BGP Identifier
- BGP Local AS
- BGP Peer Remote IP Addresses
- Bios Version
- Buffer Allocation Failure Rate
- Buffer No Memory Failure Rate
- CE HW Collector Definition
- CE OS Collector Definition
- CE Polling Duration
- CE Polling Status
- CE Status Detail
- Certified
- Chassis Fan Status
- Chassis Status
- Chassis Temperature
- Cluster Current Users
- Config Change Type
- Configuration Transfer Server
- Count of Critical Events
- Count of Info Events
- Count of Major Events
- Count of Minor Events
- Count of Severe Events
- CPU Utilization %
- Current Users
- Degraded
- Description
- Device State
- Device SysUpTime Counter Wraps
- Device Type
- Display Name
- Down %
- EIGRP Peer Remote IP Addresses
- Event Summary
- Extra Info
- File Hits Rate
- Firmware Image Last Status
- Firmware Image Local MD5
- Firmware Image Location
- Firmware Image Name
- Firmware Image Start
- Firmware Image Status
- Firmware Version
- Hardware Version
- ICMP Redirect Rate
- ICMP Redirects %
- ICMP TTL Exceeded Rate
- ICMP TTL Exceeded %
- Inbound VPN Packet Loss
- Inbound VPN Packet Loss Rate
- Inbound VPN Packet Rate
- Incident Status
- Incident Summary
- IP Discard Rate (No Route)
- IP Discards (No Route) %
- IP Packet Forward Rate
- IP Packet Forwards %
- IP Packet Received Rate
- IP Transport
- IS-IS Peer Remote IP Addresses
- Last Reboot Time
- LLDP Discovery Enabled
- Location
- Management Level
- Management MAC Address
- Manufacturer
- Maximum Allowed Tunnels
- Meeting Hits Rate
- Memory Used %
- Missing Components
- Model
- Name
- Name Resolution State
- NBAR Capable
- NBAR Supported Protocols
- Network Hits Rate
- Newly Disappeared Modules
- Newly Discovered Modules
- Object Status
- OK %
- OS Name
- OSPF Admin Status
- OSPF Area Border Router
- OSPF Autonomous System Border Router
- OSPF Peer Remote IP Addresses
- OSPF Router ID
- OSPF TOS Support
- Outbound VPN Packet Loss
- Outbound VPN Packet Loss Rate
- Outbound VPN Packet Rate
- Part Number
- Poll Status
- Polled Device Name
- Polled IP Address
- Power Consumption
- Product Name
- Project VDSL Port Speeds
- Running Configuration Files
- Serial Number
- SNMP Failure Rate
- SNMP Percent Waiting
- SNMP Response State
- SNMP Success Rate
- SNMP Type
- Spare Part Number
- Startup Configuration Files
- State Detail
- Stormworks ID
- System Contact
- System Description
- System Name
- System Object Identifier
- System Services
- System Type
- TCP Connections
- TCP Retransmission Algorithm
- Total Hits Rate
- Tunnel Utilization %
- Uninitialized %
- Unique ID
- Unknown %
- Version
- VPN Initiation Failure (Per Minute)
- VPN Initiation Response Failures (Per Minute)
- VPN Monitoring
- VPN System Capacity Failures (Per Minute)
- VPN Tunnel Remote IP Addresses
- VTP Domain Name
- Web Hits Rate
- XML Data Collection
- Zone
Logical Volumes
- Capacity
- Count of Critical Events
- Count of Info Events
- Count of Major Events
- Count of Minor Events
- Count of Severe Events
- Display Name
- Disk Queue Length
- Free Inodes % (Daily)
- Free Inodes % (Hourly)
- Free Inodes %
- Free Inodes
- Free Space % (Daily)
- Free Space % (Hourly)
- Free Space %
- Free Space
- File System Type
- ID
- Incident Status
- Incident Summary
- Inode Capacity
- Mount Point
- StormWorks ID
- Used Inodes % (Daily)
- Used Inodes % (Hourly)
- Used Inodes %
- Used Space % (Daily)
- Used Space % (Hourly)
- Used Space %
Network Adapter
- Address
- Alias
- Bytes In
- Bytes Out
- Duplex
- Display Name
- Count of Critical Events
- Count of Info Events
- Count of Major Events
- Count of Minor Events
- Count of Severe Events
- Duplex
- HW Address
- ID
- In Packet Discards
- In Packet Errors
- Incident Status
- Incident Summary
- Index
- Name
- Out Packet Discards
- Out Packet Errors
- Receive Rate (Bits per Second)
- Receive Rate (Bytes per Second)
- Speed
- StormWorks ID
- Transmit Rate (Bits per Second)
- Transmit Rate (Bytes per Second)
- Utilization In %
- Utilization In Snapshot %
- Utilization Out %
- Utilization Out Snapshot %
OS Services
- Count of Critical Events
- Count of Info Events
- Count of Major Events
- Count of Minor Events
- Count of Severe Events
- Display Name
- ID
- Incident Status
- Incident Summary
- Object Status
- Service Display Name
- Service Name
- Service Start Mode
- Service State
- Service Status
- Stormworks ID

To configure Linux OS SSH monitoring:

Please see this article for help and information on configuring Linux OS SSH monitoring.

Articles in this section

Introduction:

Summary dashboard details:

Monitored attributes for Linux OS:

To configure Linux OS SSH monitoring:

Comments

Articles in this section

Introduction:

Summary dashboard details:

Monitored attributes for Linux OS:

To configure Linux OS SSH monitoring:

Related articles