Applicable to Entuity v19.0 upwards.
Entuity supports the following Dell EMC VNX and VNXe devices:
- VNX VG2
- VNX VG8
Note, support for VNXe3100, VNXe 3150 and VNXe3300 has been removed from Entuity v19.0 P04 upwards.
To collect data from Dell EMC VNX and VNXe storage devices:
In order to collect data, Entuity uses a direct connection to EMC storage devices using NAVISecCLI and uemcli.
You can specify which connector to use (NAVISecCLI or uemcli) when adding the storage device to your network. Please see this article for further help and information on adding storage devices to your network, and for information on the uemcli versions that work with supported Dell VNXe storage devices.
To add a Dell EMC VNX or VNXe storage device to my network:
Please see this article for further help and information on adding a storage device to your network.
Note, when adding a Dell EMC VNX or VNXe storage device, you should use the 'Dell EMC Navisec' credential type. For further help and information on credential management in Entuity, please see this article.