To run a Spanning Tree Device Changes report
The Spanning Tree Device Changes report allows you to identify changes in the selected device's VTP and STP settings between two sample periods. Data for each sample is collected by stpman and vtpman. The comparison is between the entered start and end dates, and you can select any sample from the last seven days.
STP VLAN settings:
Name | Description |
---|---|
VLAN | VLAN name. |
Change Count | number of Root Switch changes. This is a running total. |
Max Age | length of time, in seconds, that the switch stores a BPDU before discarding it. |
Hello Time | time interval, in seconds, between the sending of Configuration BPDUs. |
Forward Delay | time, in seconds, that the switch spends in the Listening and Learning states. |
Hold Time | time interval, in seconds, between the sending of Configuration BPDUs. |
Root Switch > Port |
switch acting as the center of the VLAN. Other switches use this as the center of the network when calculating a set of root and designated ports during the initial convergence, to create a loop-free network. The second value is the device's designated root port. For the root switch, this is set to NULL because the root switch does not have a designated root port. |
Cost | cumulative root path cost. The lower the value, the closer the devices are. |
STP Connectivity settings:
Name | Description |
---|---|
Cost | cumulative root path cost. The lower the value, the closer the devices are. |
Port | port address connected to another device. |
State | local device's port's STP state, i.e. Blocking, Forwarding, Designated Port, Root Port and Non-Designated Port. |
Connected to | address of the host and port. |
State | target device's port's STP state, i.e. Blocking, Forwarding, Designated Port, Root Port and Non-Designated Port. |
To run a Spanning Tree Device Changes report:
- In the Main Menu, click Reports.
- This will open the Reports page. Click Inventory Reports.
- This will open the Inventory Reports page. Click Spanning Tree Device Changes.
- This will open the Spanning Tree Device Changes Options page.
- If you want to reuse previously saved report values, select it in the Use saved values dropdown field.
- Specify the format of the report in the Report format field.
- Specify the View containing the device against which the report is to be run in the Please select a View dropdown field. From ENA v18.0 P06 upwards, you can drag Views into this field from the Drop Box.
- Specify the device against which the report is to be run in the Please select a device dropdown field.
- Specify the start date and end date for the report in their respective dropdown fields.
- ENA v17.0 P08 upwards: Specify the time zone to which you want the reporting period to apply. By default, this is set to None, which means that the time zone of the host/consolidation server is used.
- Click Save to save your report values, Run to run immediately, or click Cancel.
Comments
0 comments
Please sign in to leave a comment.