To create a monitoring user account for Windows
To create a monitoring user account for Linux
Configuration details to specify when adding the device to Entuity
Entuity supports hardware monitoring on IBM/Lenovo xSeries servers through the IBM Systems Director Agent using WMI (for Windows) and WBEM (for Linux). To do so, the Entuity collector uses a monitoring user account for Windows or Linux, based on the operating system of the IBM/Lenovo xSeries server.
Supported devices
- IBM xSeries M3 servers and earlier
- Lenovo branded xSeries M3 servers and earlier
To create a monitoring user account for Windows:
Prerequisites:
On the IBM/Lenovo xSeries server:
- The Server Manager management console must be installed.
- The CIM Server must be started.
- The IBM Systems Director Agent must be installed.
- From the IBM/Lenovo xSeries server, create a local or domain user by going to Windows Start > Administrative Tools > Computer Management.
The Computer Management window is displayed. - Expand Local Users and Groups, right-click the Users folder, and select New User.
- Enter the user account details, click Create, and then click Close to return to the Computer Management window.
Note, if you are using a Windows domain account, you must enter the username in the following format: DOMAIN-NAME\username - Click the Groups folder, right-click the Distributed COM Users group in the right pane, and select Properties.
The Distributed COM Users Properties window is displayed. - To add the user to the group, click Add > Advanced > Find Now, select the newly created user, and then click OK.
- Click OK until you return to the Computer Management window.
- Open the Server Manager console by doing the following:
- Press Windows Key + R.
- Type wmimgmt.msc and press Enter.
- Right-click WMI Control and select Properties.
- Do the following:
- From the Security tab, click Security > Add > Advanced > Find Now.
- Select the newly created user account, and click OK until you get to the Security for Root window.
- Click Advanced.
- Select the new user and click Edit.
- From the Apply to: menu, select This namespace and subnamespaces.
- In the Permissions section, verify that Enable Account, Remote Enable, and Read Security are selected.
- Click OK until you return to the wmimgmt window, and then select File > Exit.
To create a monitoring user account for Linux:
Prerequisites:
On the IBM/Lenovo xSeries server:
- The CIM Server must be started.
- The IBM Systems Director Agent must be installed.
- From the IBM/Lenovo xSeries server, create a local or root user account.
Note, by default, the CIM Server installed with IBM Systems Director Agent only authorizes root to perform WBEM queries. You must create a root account for Entuity or configure the CIM Server to allow the agent to perform WBEM queries. -
Configure the CIM Server:
- Log into the CIM Server as root.
- Assign the group of the newly created user account to the authorizedUserGroups variable:
/opt/ibm/icc/cimom/bin/cimconfig-p-s authorizedUserGroups= ‹group›
Note, if you leave the authorizedUserGroups variable empty (instead of specifying a group), any valid account will be allowed to make requests to the IBM Services Director Agent through the WBEM protocol. -
Run the following commands to restart the CIM Server and daemons:
/etc/init.d/cimlistenerd stop
/etc/init.d/cimserverd stop
/etc/init.d/cimlistenerd start
/etc/init.d/cimserverd start
Configuration details to specify when adding the device to Entuity
When you add the server to Entuity from the Asset Management page, specify the following information on the Add Asset form:
- In the Management Level section, select Server from the Asset Category drop-down field, and IBM X-Series from the Asset Type drop-down field.
- In the Asset Details section, enter the server IP address in the Polled Name/IP Address field.
- In the Hardware Monitoring section, select IBM Director Agent (WMI) from the Connection Method drop-down field.
- On the Credential form (accessed by clicking the Credential field in the Hardware Monitoring section), enter the newly created user account name and password in the appropriate fields.
Comments
0 comments
Please sign in to leave a comment.